===== Quick Start Guide =====
Once you have booked a Visualizer licence plan (https://vrdoro.com/pricing/) you will receive, depending on the licence:
  * access to an area for your surveying and visualisation projects, or
  * a 3D configurator for your product

We have summarised this information for you here:

{{INLINETOC 3-4}} 

===== Setting up the headset =====

If you still need to set up your headset, follow the instructions at [[en:viewer:headset-start|]].

==== Headset functions ====

Please watch the [[en:viewer:headset-note]] and follow the recommendations given.

==== Video tutorial ====

The following video is a step-by-step guide. It shows you how to open the visualiser in the headset for the first time. If you do not [[en:pen-controller|]] as shown in the video, you can also use the [[en:meta-controller|]]. 
{{ vimeo>1220274908?full }}
You can find further information on the steps shown in the video below. 

==== Your projects ====
<WRAP center round info 60%>
If you’ve booked a single 3D configurator without a survey, you can [[#en:viewer:bedienung_in_mixed-reality_mr|skip]].
</WRAP>

When you book a [[https://vrdoro.com/pricing/|Lizenz]] you will receive a certain number of projects, depending on your licence plan. The projects contain the tools you have booked. All the data you collect is stored within these projects. For the measurement tools, this includes, for example, the measurement results.

=== Logging in to the vrdoro-editor ===
The vrdoro-visualiser is a web platform that you can access via URLs. The vrdoro-editor is the project management tool. You use this to manage and open your visualiser projects.

To do this, log in here on your desktop computer or laptop using a Chrome browser: https://vrdoro.com/editor/

Once you’ve logged in, you’ll see information about your licence and projects on your dashboard:

{{ viewer:pasted:20260224-082736.png?600&direct }} 
<WRAP centeralign lo>(Click on the image to enlarge it)</WRAP>

=== === project overview 
When you select the menu item ''visualizer'' you’ll see your projects and can open one by selecting it.

{{ viewer:pasted:20260224-091901.png?600&direct }} 
<WRAP centeralign lo>(Click on the image to enlarge it)</WRAP>

=== Viewing projects in the headset ===
To view a project in the headset, follow these steps:
  - Log in to https://vrdoro.com/editor/
  - Select a project

<WRAP center round tip 60%>
Create bookmarks for these URLs in the headset browser.
</WRAP>


Once you’re logged in, you can also, from your desktop computer, use the {{fa>share|Teilen}} Share icon {{https://cdn.vrdoro.com/shared/assets/images/app/meta-icon-no-text.svg?20&trim<ignore>=1</ignore>}} ''Web Launch'' to open the project directly in the headset browser.

==== Operating in Mixed Reality (MR) ====
In Mixed Reality, you see your surroundings through the headset’s cameras whilst wearing the headset. Virtual objects are also displayed. Any virtual objects without transparency will obscure the real-world view, regardless of their virtual distance.

=== Getting started with Mixed Reality ===
To access the Mixed Reality view from within your project, there is often a ‘Get started now’ button. If this is not available – as is the case with the configurators, for example – you can click the ~~entity-fa-glasses~~ glasses icon in the [[en:viewer:top-menu-bar|]]. Then select ‘Start MR’ in the dialogue box.

As there is no limit (see [[en:viewer:headset-note#einrichten_der_begrenzung|here]]), you’ll see a message from the headset at the start //"Create new free-space boundary?"//. Simply ignore this; the prompt will disappear after about 10 seconds.

=== Switching between the MR tool and the browser ===
To switch between the Mixed Reality view and the browser in the headset **, press twice briefly** (as if double-clicking) on the {{https://cdn.vrdoro.com/data/vrdoro/images/shared/app/meta-icon-no-text.svg?w=20&tint=black&mod=0&.png?nolink}} Meta button on your controller.

=== Menu and Help section ===
The menu operation differs between [[en:headset-controller|]] and [[en:pen-controller]]  .

== Standard Controller ==
You open the menu using the Menu button on the left [[en:headset-controller|]]. Select menu items using the laser beam on the right-hand controller: they will be highlighted. When you select an item using the button beneath your index finger on the right-hand controller, you trigger the action.

:?: //Opening the menu: Briefly press the menu button on the left-hand controller to display the menu.//

:?: //Hide the menu: Briefly press the menu button on the left-hand controller to hide the menu.//

:?: //Selecting a menu option: Point the laser beam on the right-hand [[en:headset-controller|]] at the menu item and briefly press the front button with your index finger.//

== pen controller ==  
The menus and the help section, as well as all dialogue boxes that appear in front of you in MR, are operated using the front button on the [[en:pen-controller]] 
:

:?: //Opening the menu: Press the front pen button briefly to display the menu.//

:?: //Hide the menu: Point the laser beam **not** at the menu and briefly press the front pen button.//

:?: //Select a menu item: Point the laser beam at the menu item and press the front pen button briefly.//

<WRAP center round info 60%>
When using the [[en:pen-controller]] , the following applies:
  * Every dialogue (menus, confirmation dialogues, selection of tools and textures) that appears on screen is operated using the front pen button
  * Every other action is performed using the rear pen button (not the Meta button)
</WRAP>

== Basic functions of the help ==

You can find out more about using the help in the menu here: [[en:vproduct:helper-tool:help-panel|]]

<ifauth @admin>
<WRAP caution>
In the following video, we demonstrate how to use the MR menu and the help section, as well as their basic functions.

TODO: Video
</WRAP>
</ifauth>

You always access the Help section and all dialogue boxes using the front button on the [[en:pen-controller]] . All other actions, such as working with the position markers, are controlled using the rear button. 

== Voice control ==

All menu items can be selected via voice control, even without opening the menu: to do this, activate voice input using the middle side button on the [[en:pen-controller]] .

The voice commands correspond to the tooltips in the menu. You can get an overview by saying “What (can I say)?”

=== Take a Photo in Mixed Reality ===

This guide outlines the steps for capturing photos within the MR view using either voice commands, hand controllers, or the global menu.

== Managing Browser Permissions in Headset == 

If you need to verify or update the permissions for the headset's built-in browser (such as camera or microphone access), follow these steps inside your device:

  * Open Settings
  * In the settings panel, select Privacy & safety, then click on Installed apps.
  * Find the browser app in your list of installed apps.
  * Ensure that permissions like Virtual Camera, Headset Camera, and Microphone are toggled On

== Granting Browser Permissions == 

A browser notification or dialog box will appear asking for permission to use your Microphone and Camera. click allow access for the virtual camera, headset camera and microphone

== Access the Capture Tool == 

You can trigger a photo capture using any of the following methods: 

  * Using Voice Commands with the Stylus Pen :   Press and hold the middle button on your stylus pen. Look for the red microphone icon to appear, indicating that the system is actively listening for your voice. While holding the button down, clearly speak your command phrase (e.g., "Take photo" or "Capture photo"). Keep the button pressed until you finish speaking your command, then release it.

  * Opening the Context Menu: Click on the green icon located on the floor grid to bring up the context menu options. Locate and click the Camera icon inside the menu to trigger the snapshot process. Once captured, the image is automatically processed and added directly to your room's photo gallery (indicated by the updated count on the Gallery button).

== Confirmation and Saving == 

  * Once triggered, a visual countdown (starting from 3) will appear in your display
  * When the countdown reaches zero, you will hear a camera-click sound indicating the snapshot has been taken.
  * Image is saved to the gallery.  
  * Click the Gallery button located directly inside the context menu to launch the photo gallery panel. Browse through your saved photos, view thumbnails, or click on an image to open it in full size.





==== MR Tools ====

=== Using position markers ===

Position markers are used in all measurement tools. The video demonstrates:
  * how to set position markers
  * how to open the context menu
  * how to record position markers
{{ vimeo>1220278652?full }}

=== Using a tool multiple times in a project ===
Each tool can be added multiple times within a project. Example: You want to measure a floor using the ‘Room Measurement’ tool. There are two ways to do this.

== Measuring a floor: in one go ==
When measuring, you go through all the rooms one after the other. You always move in one direction, either clockwise or anti-clockwise (i.e. always to the right or always to the left). This gives you a single, contiguous space for the entire floor:

{{ viewer:pasted:20260219-153157.png?400&direct }} 

Advantages:
  * Simple
 
Disadvantages:
  * All data is collected without distinguishing between rooms
  * You cannot measure different room heights or floor levels
  * You can only visualise one type of floor covering

== Surveying a floor: room by room ==
<WRAP #measure-room-by-room>
<div three-col-grid>
<div>{{viewer:pasted:20260220-081629.png?direct&100}}</div>
<div>
You measure one room and then – from the main menu, as shown in the image – add the next room using the ‘+’ icon in the main menu. The tool is activated straight away and you can then measure that room. You can now switch between these rooms and view all the data separately.
</div>
<div>
{{ viewer:pasted:20260219-164445.png?400&direct }} 
</div>
</div>
</WRAP>
<WRAP #measure-room-by-room>
<div two-col-grid>
<div>{{viewer:pasted:20260220-084356.png?direct&200}}</div>
<div center round tip 60%>
Tip: Give each room a different name so you can find your way around more easily.
</div>
</div>
</WRAP>

Advantages:
  * Separate data for each room
  * Different room heights and floor levels
  * Visualisation of different floor coverings 

Disadvantage:
  * Requires a few more steps to insert the rooms



=== Conservatory ===

== Positioning with the standard controllers ==
Using the [[en:meta-controller|]] headset, you can position the conservatory using the green or yellow cylinders:

{{ vimeo>1165399819?full }}

== Positioning with the pen controller ==
With the [[en:pen-controller|]] for precise measurement, you can position the conservatory exactly using the tip of the pen.