Differences

This shows you the differences between two versions of the page.

--- en:laser-measure-device [2025/11/14 09:12] – removed julia
+++ en:laser-measure-device [2025/11/14 09:13] (current) – julia
@@ Line 1: / Line 1: @@
+<WRAP vrdoro-help #measure-device>
+<div title>
+{{https://cdn.vrdoro.com/data/vrdoro/images/shared/app/laser-rangefinder.png?filt=negate&w=40&.png?nolink}}
+===== Laser measuring device =====
+</div>
+In order to [[en:vproduct:room-measure|]] you can use a laser measuring device. The laser measuring device should have a Bluetooth interface so that the data is automatically reported to the software and you do not have to transfer it manually.
+==== Supported devices ====
+The following laser measuring devices are supported:
+  * [[https://www.bauhaus.info/entfernungsmesser/bosch-professional-laserentfernungsmesser-glm-50-27-c/p/28429485|Bosch GLM 50-27 C(G)]]
+  * [[https://www.bauhaus.info/entfernungsmesser/bosch-universal-laserentfernungsmesser-universaldistance-40-c/p/31308935|UniversalDistance 40C]]
+Your device is not supported? Let us know which Bluetooth-enabled device you are using at [email protected] and we will support it as quickly as possible.
+==== Measuring tip ====
+<div two-col-grid>
+<div>{{::measuring-tip-in-corner.jpg?nolink&400|}}</div>
+<div>
+When measuring diagonals in a room, you must position the measuring device in the corner according to the rules. At an angle of 90°, for example, it is not possible to reach the angle with the measuring base due to the size of the devices. **We have developed the vrdoro measuring tip to solve this problem.** When using the tip, you activate the **Measure with the measuring tip** via this menu item: {{https://cdn.vrdoro.com/data/vrdoro/images/shared/app/rangefinder-with-extension.png?filt=negate&w=20&trim=1&.png?nolink}}.
+</div>
+</div>
+<div two-col-grid>
+<div>{{::measuring-tip-with-cap.jpg?nolink&400|}}</div>
+<div>
+The measuring tip is attached to the device and remains **remains there**. You no longer need to remove it. The vrdoro measuring tool automatically adds the tip length of 40 mm to the measurement. If you want to use a straight measuring base or want to secure the tip in your tool bag during transport, you can use the **measuring cap** on the tip.
+</div>
+</div>
+<div two-col-grid>
+<div>{{::measuring-tips.jpg?nolink&400|}}</div>
+<div>
+**You will receive the measuring tip worth 19.90 euros free of charge when you purchase an annual licence for the Professional or Premium package (see [[https://vrdoro.com/pricing/|Lizenzpreise]]) will be sent to you free of charge as a welcome gift.**
+</div>
+</div>
+</WRAP>